Omron SYSMAC W398-E1-1, Руководство по эксплуатации

Страница: 42 / 127

28
Basic Operations Section 2-3
2-3-8 Operations Listed by Purpose
Purpose Operation Keyboard
shortcut
Toolbar
icon
Refer-
ence
section
Project Creating a new
project File – New Ctrl+N 3-1
Opening a project File – Open Ctrl+O 5-2-1
Closing a project File – Close Project --- --- 2-3-2
Saving (overwriting) File – Save Project Ctrl+S 5-1-1
Saving with a differ-
ent name File – Save Project AS Ctrl+A --- 5-1-1
Importing File – Import --- --- 5-2-2
Printing File – Print Ctrl+P 9-1
Creating a new PC Edit – New PC
or
Right click – New PC --- 3-2-1
Creating a new NC
Unit Select a PC – Edit/New NC
or
Select a PC – Right click – New NC --- 3-3-1
Displaying the prop-
erties for a project,
PC, or NC Unit Select a PC or NC Unit – File – Properties
or
Select a PC – Right click – Properties --- --- 3-1
Removing a PC or
NC Unit Select a PC or NC Unit – Edit – Remove
or
Select a PC or NC Unit – Right click – Remove DEL 3-2-2,
3-3-2
Cutting an NC Unit Select an NC Unit – Edit – Cut
or
Select an NC Unit – Right click – Cut Ctrl+X 2-3-5
Copying NC Unit data Select an NC Unit – Edit – Copy Ctrl+C 2-3-5
Pasting an NC Unit Select a PC – Edit – Paste
or
Select a PC – Right click – Paste Ctrl+V 2-3-5
Pasting NC Unit data Select an NC Unit – Edit – Paste
or
Select an NC Unit – Right click – Paste Ctrl+V 2-3-5
Moving NC Unit data Drag the NC Unit using the mouse and drop it at
the desired PC. --- --- 2-3-5