Omron SYSMAC W398-E1-1, Руководство по эксплуатации, Страница: 55 / 127

41
Adding and Deleting NC Units Section 3-3
3-3 Adding and Deleting NC Units
3-3-1 Adding an NC Unit
Use the following procedure to add an NC Unit to a PC.
1,2,3... 1. Select the PC to be added to from the project tree.
2. Either select Edit/New NC (M), or right-click and select New NC (M) from
the pop-up menu.
3. Enter the NC Name. New NC @ (where @ = 1, 2 etc.) is the default name.
4. Set the NC Type by clicking on the NC Type drop-down list and selecting.
5. Select the Unit No. allocated to the NC Unit (as a Special I/O Unit)
6. Enter a comment if required.
7. Click the OK Button to add the NC Unit to the project.
3-3-2 Deleting an NC Unit
1,2,3... 1. Select the NC Unit to be deleted from the project tree, and select Edit/Re-
move DEL, press the DEL Key, or right-click and select Remove/DEL from
the pop-up menu.
2. A dialog box will be displayed asking “Do you want to delete?” Click the OK
Button.