Omron Sysmac NX1P2-10 1 Series, Руководство пользователя

Страница: 252 / 578

Model after
change
CS1W
-EIP21
CJ1W
-EIP21
CJ1W
-EIP21
(CJ2)
CJ2B-
EIP21
CJ1W
-EIP21
(NJ)
CJ2M NJ501-
££££
NJ301-
££££
NJ101
NX701 NX102 NX1P2
Model
before
change
CIP
Rev
Rev2 Rev3 Rev3 Rev3 Rev3 Rev3
Rev1
*1
Rev2
*2
Rev2 Rev 2 Rev2
CJ1W-
EIP21 Rev3
Yes
---
Yes Yes
r
5
r
3
r
4/5
r
4/5
No No No
CJ1W-
EIP21
(CJ2) Rev3 r 1 r 1 --- Yes r 5 r 3 r 4/5 r 4/5 r 5 r 4/5 r 4/5
CJ2B-
EIP21 Rev3 r 1 r 1 Yes --- r 5 r 3 r 4/5 r 4/5 r 5 r 4/5 r 4/5
CJ1W-
EIP21
(NJ) Rev3 r 1/2 r 1/2 r 2 r 2 --- r 2/6 r 4 r 4 Yes r 4 r 4
CJ2M Rev3 r 1 r 1 Yes Yes r 5 --- r 4/5 r 4/5 r 5 r 4/5 r 4/5
NJ501- £
£££
NJ301-
£
£££
NJ101
Rev1
r
1/2
r
1/2
r
2
r
2 Yes
r
2/6 --- Yes No No No
Rev2 r 1/2 r 1/2 r 2 r 2 Yes r 2/6 Yes --- Yes r 4 r 4
NX701 Rev2 No No r 2 r 2 Yes r 2/6 No r 4 --- r 4 r 4
NX102 Rev 2 No No r 2 r 2 Yes r 2/6 No Yes Yes --- r 4
NX1P2 Rev2 No No r 2 r 2 Yes r 2/6 No Yes Yes Yes ---
*1. CPU Unit with a unit version 1.00 to 1.02
*2. CPU Unit with a unit version 1.03 or later
Yes Can be changed.
No: Cannot be changed.
r 1 Cannot be changed if a network variable is specified as a tag.
r 2 Cannot be changed if the maximum size of a tag name or tag set name (size after conversion into
UTF-8) exceeds 48 bytes.
r 3 Cannot be changed if the following items exceed the permissible settings of the device after the
change:
•
Number of I/O connections, number of tags, number of tag sets, and size of one tag set.
r 4 Cannot be changed in any of the following cases:
•
The number of I/O connections, number of tags, number of tag sets, or size of one tag set ex-
ceeds the permissible settings for the device after the change.
•
RPI exceeds the permissible settings or is set in 0.5-ms increments (such as 10.5ms)
r 5 Cannot be changed if a tag set size is an odd number of bytes.
r 6 Cannot be changed if tags, tag sets, or refreshing sizes exceed the permissible settings.
7-2-18
Displaying Device Status
Device status is displayed using the following icons in Maintenance Mode.
To enter Maintenance Mode, select
Large Icons - Maintenance Mode from the View Menu.
7 Tag Data Link Functions
7-78
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)