Omron SX-F, Инструкция по эксплуатации

Страница: 91 / 316

83
SECTION 11
Functional Description
This chapter describes the menus and parameters in the software. You will
find a short description of each function and information about default values,
ranges, etc. There are also tables containing communication information. You
will find the Modbus, DeviceNet, EtherCAT and Fieldbus address for each
parameter as well as the enumeration for the data.
Note Functions marked with the sign cannot be changed during Run Mode.
Description of table layout
Resolution of settings
The resolution for all range settings described in this chapter is 3 significant
digits. Exceptions are speed values which are presented with 4 significant dig-
its. Table 23 shows the resolutions for 3 significant digits.
11-1 Preferred View [100]
This menu is displayed at every power-up. During operation, the menu [100]
will automatically be displayed when the keyboard is not operated for 5 min-
utes. The automatic return function will be switched off when the Toggle and
Stop key is pressed simultaneously. As default it displays the reference and
torque values.
Menu [100], Preferred View displays the settings made in menu [110], 1st line,
and [120], 2nd line. See Fig. 62.
Fig. 62 Display functions
Default:
Selection or
range Integer value of
selection
Description
Table 23
3 Digit Resolution
0.01-9.99 0.01
10.0-99.9 0.1
100-999 1
1000-9990 10
10000-99900 100
Menu no. Menu
name
100 0rpm
Stp 0.0Nm
A
100 (1st Line)
Stp (2nd Line)
A