Omron SX-F, Инструкция по эксплуатации

Страница: 50 / 316

42
Terminal connections
Section 5-2
5-2 Terminal connections
The terminal strip for connecting the control signals is accessible after open-
ing the front panel.
The table describes the default functions for the signals. The inputs and out-
puts are programmable for other functions as described in chapter SECTION
11 page 83. For signal specifications refer to chapter SECTION 14 page 277.
Note The maximum total combined current for outputs 11, 20 and 21 is 100mA.
Table 16 Control signals
Terminal Name Function (Default)
Outputs
1 +10 V +10 VDC supply voltage
6 -10 V -10 VDC supply voltage
7 Common Signal ground
11 +24 V +24 VDC supply voltage
12 Common Signal ground
15 Common Signal ground
Digital inputs
8 DigIn 1 RunL (reverse)
9 DigIn 2 RunR (forward)
10 DigIn 3 Off
16 DigIn 4 Off
17 DigIn 5 Off
18 DigIn 6 Off
19 DigIn 7 Off
22 DigIn 8 RESET
Digital outputs
20 DigOut 1 Ready
21 DigOut 2 Brake
Analogue inputs
2 AnIn 1 Process Ref
3 AnIn 2 Off
4 AnIn 3 Off
5 AnIn 4 Off
Analogue outputs
13 AnOut1 Min speed to max speed
14 AnOut2 0 to max torque
Relay outputs
31 N/C 1
Relay 1 output
Trip, active when the VSD is in a TRIP condition.
32 COM 1
33 N/O 1
41 N/C 2
Relay 2 output
Run, active when the VSD is started.
42 COM 2
43 N/O 2