Omron SX-F, Инструкция по эксплуатации

Страница: 16 / 316

8
Ordering codes
Section 1-3
1-3 Ordering codes
Fig. 1 and Fig. 2 give examples of the ordering code numbering used on SX
variable speed drives
.
With this code number the exact type of the drive can
be determined. This identification will be required for type specific information
when mounting and installing. The code number is located on the product
label, on the front of the unit.
Fig. 1 Type code number
Fig. 2 Option letters
1 2 3 4 5 6 7
SX- D 6 160- E F -OPTIONS
Position n.chars Configuration
1 3 Inverter family name “SX-”
2 1 Protection class
“A”=IP20
“D”=IP54
3 1 Voltage Class
“4”=400V
“6”=690V
4 4
Power in kW
(normal duty rating)
“0P7-”=0.75kW
...
“1K0-”=1000kW
5 1 Market
“E”=Europe
“E1”=Europe IP54 cabinet with front
door fan
6 6 Control type “F”=Direct Torque Control
7 0 to 13
All options with single letter (see table
below)
“-”+letters A to Z
Options Letter (“?” means no character)
Control panel
“?” = Standard control panel (Std.PPU)
“A”= Blank control panel (Blank PPU)
Built-in EMC filter
“?” = Standard EMC inside (Category C3)
“B” = IT-Net (filter disconnected from ground)
Built-in brake chopper
“?” = No brake chopper or DC-connection included
“C” = Brake chopper & DC-connection included
“D” = Only DC-connection included
Standby power supply
“?” = Not included
“E” = Standby power supply included
Safe stop
“?” = Not included
“F” = Safe stop included
Coated boards
“?” = No coating
“G” = Coated boards
Option board
position 1
“?” = No option
“H” = Crane I/O
“I” = Encoder
“J” = PTC/PT100
“K” = Extended I/O“
Option board
position 2
“?” = No option
“I” = Encoder
“J” = PTC/PT100
“K” = Extended I/O“