![background image](http://html1.mh-extra.com/html/omron/stc-s133uvc-series/stc-s133uvc-series_product-specifications-and-users-manual_742913016.webp)
No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide
16/63
4.6 To use the camera
Windows system
Requirement software
1) Camera control software: KSACtrl (version 2.02 or newer)
2) OSD software: S133Control
(The camera settings are changeable with on screen display)
* UVC camera supported viewer software (UVC Viewer) is required to obtain the image.
Software installation
CDC driver
for communicate to the camera, install before camera connects to the PC.
Please follow below procedure.
1) Install KSACtrl.
2) Install CDC driver by selecting “Install CDC driver” under “KSACtrl” under “Sentech” at Program menu.
Please select correct installer from 32bits (x86) or 64bit (x64).
* CDC driver is installing automatically when the camera connecting to the Windows10 PC.
(CDC driver manual install is not necessary)
3) The driver is installing automatically when the camera connects to PC after installed CDC driver.
The driver installing may take few minutes.
4) The camera disconnects from PC after installing the driver correctly.
5) The camera connects to PC.
The image can obtain by UVC Viewer and camera settings are changeable from KSACtrl or OSD software
(S133Control)
Linux system
We’ve confirm the image with Cheesa and Guvcview on Ubuntu and CentOS Linux.
The camera settings are changeable from OSD software (S133Ctrol)