No.18S111-03
54/70
STC-MBS500POE / STC-MCS500POE
Product Specifications and User’s Guide
10.18 Chunk Control
This function is attached additional image information to image data.
For example, the exposure time and gain information do not include in image data itself. However, Chunk data
transfers these parameters when image was acquiring.
GenICam Parameters
ChunkModeActive
IBoolean Type
Chunk control ON / OFF selection
Default: “False” (Off)
ChunkSelector
IEnumeration Type
Transfer Chunk data selection
Selection: “Image”, “Offset X”, “Offset Y”, “Width”, “Height”, “Pixel Format”,
“Gain”, “Exposure Time”, “Black Level”, “Line Status All”,
“Device Temperature”, “Timer Value” and “Counter Value”
ChunkEnable
IBoolean Type
Enable Chunk data that was selected at “Chunk Selector”
Selection: “True” (Enable Chunk data) and “False” (Disable Chunk data)
10.19 Action Control
The multiple cameras control by one action signal.
GenICam Parameters
ActionQueueSize
IInteger Type
Size of scheduled action command queue
ActionDeviceKey
IInteger Type
Control identifier of camera
ActionSelector
IInteger Type
Action command application selection
Fixed as “0”
ActionGroupKey
IInteger Type
Action command applies camera
* The camera executes action command when group key of action command
and group key of camera is matched.
ActionGroupMask
IInteger Type
Select camera to apply action command
Logical AND of Group Mask of camera and Group Mask of action command is 1
for any bit of 32bits, camera executes action command.
