![background image](http://html1.mh-extra.com/html/omron/sentech-stc-cmb120apcl-series/sentech-stc-cmb120apcl-series_product-specifications-and-users-manual_744095060.webp)
No.14S056-11
60
STC-CMC120APCL, STC-CMB120APCL
Specifications and Users guide
9
Actual Camera Setting & Technical Notes
9.1 Using the Trigger Signal through 6pin
1.Select the “[0]Trigger Shutter Mode(Long Exposure)” on
Contiue/Trigger Shutter Mode Selection at
Standard tab through the control software(CLCtrl2).
2. Select the ”[0H] FIL_TRG/LVAL/FVAL_TRG_IN” on
SP Pin Signal Selection at SP_Pin tab.
3. Input the trigger signal through Pin2. As for using the software, please refer to the
SP Pin Signal Selection Table
Pin No
5
4
3
2
Addr=F0
SP1
SP2
SP3
SP4
0
AfterTrigger FILTER
LVAL
FVAL
Trigger Input
1
F1h.0
F1h.1
F1h.2
F1h.3
2
After Trigger FILTER
HIGH in exposure
LOW in exposure
Trigger Input
7
LVAL
CC1
HIGH in Exposure
FVAL
Others
Reserved
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.