This monitor has a memory capable of storing 60 sets of readings. Every
time you complete the measurement, the monitor automatically stores the
blood pressure and pulse rate. If there are three readings within 10
minutes of the last reading, the average of the three readings is displayed.
NOTE:
When 60 sets of readings are stored in memory, the oldest set
will be deleted to store a new set.
1.
Press the MEMORY button
.
If there are three readings stored in
memory that were taken within 10 minutes
of the last reading, an average value for
those reading is displayed. (If there are
only two readings in memory for that
period, the average will be based on two readings. If there is only one
reading in memory for that period, that reading will be displayed as
the average.)
NOTE:
If there are no measurements
results stored in memory, the
screen to the right is displayed.
HOW TO USE THE MEMORY FUNCTION
21
EN-02-31[SEM-2]-3 8/23/05 8:58 AM Page 21
