manualshive.com logo in svg
background image

S8VK-S

17

Safety Precautions

Warning Indications

Meaning of Product Safety Symbols

 

!

WARNING

Electrical shock may occur if  the terminal comes off.
Insert the solid wire or ferrule straight into the 
terminal block until the end touches the terminal 
block.

 

!

CAUTION

Minor electric shock, fire, or Product failure may 
occasionally occur. Do not disassemble, modify, or 
repair the Product or touch the interior of the 
Product.

Minor burns may occasionally occur. Do not touch 
the Product while power is being supplied or 
immediately after power is turned OFF.

Minor injury due to electric shock may occasionally 
occur. Do not touch the terminals while power is 
being supplied. Always close the terminal cover after 
wiring.

Minor electric shock, fire, or Product failure may 
occasionally occur. Do not allow any pieces of metal 
or conductors or any clippings or cuttings resulting 
from installation work to enter the Product.

WARNING

Indicates a potentially hazardous 
situation which, if not avoided, will 
result in minor or moderate injury, or 
may result in serious injury or death. 
Additionally, there may be significant 
property damage.

CAUTION

Indicates a potentially hazardous 
situation which, if not avoided, may 
result in minor or moderate injury or in 
property damage.

Precautions for 

Safe Use

Supplementary comments on what to 
do or avoid doing, to use the product 
safely.

Precautions for 

Correct Use

Supplementary comments on what to 
do or avoid doing, to prevent failure to 
operate, malfunction or undesirable 
effect on product performance.

Used to warn of the risk of electric shock under 
specific conditions.

Used to warn of the risk of minor injury caused by 
high temperatures.

Use to indicate prohibition when there is a risk of 
minor injury from electrical shock or other source 
if the product is disassembled. 

Used for general mandatory action precautions 
for which there is no specified symbol.

Содержание S8VK-S Series





























Отзывы: