Omron R8IT, Инструкция по эксплуатации

Страница: 13 / 56

13
How to Use the Memory Function
This monitor has a memory function to store up to 90 measurement results.
When you push the MEMORY button, the monitor displays the measured
values together with the date and time.
For the 91st measurement and onward, the measured values are deleted
from the oldest one.
To delete all the stored data, use the Setting Mode. (Refer to Page 19.)
If the memory is set to OFF in the Setting Mode, the monitor does not store
the measured values. (Refer to Page 17.)
• The measured values are retained in memory even after the batteries are
removed for battery replacement.
1.
Push the MEMORY button.
The measured values that are stored in memory
are displayed with the
mark.
2.
Check the memory.
Each time you push the : button, the last
measured values are displayed.
If you push the
: button, the screen moves
backward to the previous one.
• If you push the
:
button while the last
measured values are being displayed,
the oldest measured values are displayed.
• If you push the GRAPH button during
the memory display, you can see the
measured values of one week (including the
called out measured values) in graph display.
If you push the MEMORY button again, the screen
returns to the memory display.
Date and
Time of
Measurement