
6
. Maintenance and Inspection
40
■
Procedure for recycling the battery
1.
Use a screwdriver to loosen (turn clockwise) the 2 screws at the top of the front panel of the unit.
Pull the left side of the front panel towards you to remove it.
②
2.
Remove (turn clockwise) the 2 screws that holds the plate cover in place.
①
Pull the right side of the plate cover towards you to remove it.
②
Loosen the 2 screws.
①
Pull the left side towards you to
remove it. ②
Remove the 2screws.
①
Pull to the right
and towards you to
remove it.
②
3.
Pull out the battery connector holding its both ends to disconnect the connector.
Hold here to disconnect.
●
A battery can present a risk of electrical shock and high short circuit current.The following pre-
cautions should be observed when working on batteries:
1) Remove watches, rings, or other metal objects from the hands.
2) Use tools with insulated handles.
3) Wear rubber gloves and boots.
4) Do not lay tools or metal parts on top of batteries.
5) Disconnect charging source prior to connecting or disconnecting batteries terminals.
●
Servicing of batteries should be performed or supervised by personnel knowledgeable of batter-
ies and the required precautions. Keep unauthorized personnel away from batteries.