Omron NYP17-*-11 SERIES, Руководство пользователя

Страница: 20 / 264

Operation
• Do not carry out the following operations when accessing a USB device or an SD Memory Card.
• Turn OFF the power supply of the product.
• Press the Power Button of the product.
• Remove a USB device or SD memory card.
• Do not attempt to remove or touch the fan unit while the product is powered ON or immediately after
the power supply is turned OFF. If you attempt to replace the fan unit then, there is a risk of personal
injury due to hot or rotating parts.
• Press the power button for several seconds to force the product shutdown. Always back up files in
the planned way to prevent data loss or system file corruption.
• Do not touch any product housing when power is being supplied or immediately after the power sup-
ply is turned OFF. Doing so may result in burn injury.
• Confirm the safety of the system before using the touch panel.
• Signals from the touchscreen may not be entered if the touchscreen is pressed consecutively at
high speed. Only move on to the next operation after confirming that the product has detected the
previous input of the touchscreen.
• Do not accidentally press the touchscreen when the backlight is not lit or when the display does not
appear. Confirm the safety of the system before pressing the touchscreen.
• Do not use hard or pointed objects to operate or scrub the touchscreen, otherwise the surface of the
touchscreen may be damaged.
General Communications
• Separate the machine network segment from the office network to avoid communication failures.
Battery Replacement
• Dispose of any Battery that has been dropped on the floor or otherwise subjected to excessive
shock. Batteries that have been subjected to shock may leak if they are used.
• UL standards require that only an experienced engineer replace the Battery. Make sure that an ex-
perienced engineer is in charge of Battery replacement.
• The Battery may leak, rupture, heat, or ignite. Never short-circuit, charge, disassemble, heat, or in-
cinerate the Battery or subject it to strong shock.
Cleaning, Maintenance and Disposal
• Do not use corrosive substances to clean the product. Doing so may result in the failure or malfunc-
tion.
• Periodically check the installation conditions in applications where the product is subject to contact
with oil or water.
• As the rubber gasket will deteriorate, shrink, or harden depending on the operating environment, pe-
riodical inspection is necessary.
• Dispose of the product and batteries according to local ordinances as they apply.
Precautions for Safe Use
18
NY-series Industrial Panel PC User's Manual (W555)