Omron NX701-1620, Руководство пользователя

Страница: 67 / 168

2 - 3
2 System Configuration
NX-series CPU Unit Hardware User’s Manual (W535)
2-
1 Basic Syst
em C
onf
igu
ratio
n
2
2-
1-1 Eth
erCA
T
N
etwork Configur
ation
The EtherCAT network configuration consists of an NX-series CPU Unit, an NX-series Power Supply
Unit, an End Cover, and the EtherCAT slaves.
You use the built-in EtherCAT master port on the NX-series CPU Unit to connect EtherCAT slaves.
For information on the system configuration of an EtherCAT network, refer to the NJ/NX-series CPU
Unit Built-in EtherCAT Port User’s Manual (Cat. No. W505).
 NX-series CPU Units
The Unit that serves as the center of control for a Machine Automation Controller. It executes tasks,
refreshes I/O for other Units and slaves, etc. The NX-series CPU Unit includes the NX701-

.
Refer to 3-1 CPU Units on page 3-2 for the models and specifications of individual NX-series CPU
Units.
2-1-1 EtherCAT Network Configuration
Configuration Units
ADR ADR
NX-series Power Supply Unit NX-series CPU Unit
End Cover
Built-in EtherNet/IP port Built-in EtherCAT port
EtherCAT slaves
Slave Terminal
General-purpose
slaves
Servo Drive/encoder
input slaves
SD Memory Card
CPU Rack
EtherCAT
EtherCAT
Network Configuration