Omron NX-SL series, Инструкция и справочник

Страница: 54 / 270

2 Standard Functions
2 - 20 NX-series Safety Control Unit Instructions Reference Manual (Z931)
WORD_TO_DINT
This function converts a WORD variable to a DINT variable.
If you omit an input or output parameter, a building error will occur.
This function converts WORD data In to DINT data Out .
Example for the Range of WORD Data (WORD#16#0000 to WORD#16#FFFF)
• The value of
Out is DINT#0 to DINT#65535.
To convert DINT data to WORD data, refer to DINT_TO_WORD.
• The input condition depends on whether the output is safety data or standard data. If the condition is
not met, a building error will occur.
• If you set a safety data type variable for the output terminal, set a safety data type variable for the
input terminal as well.
• If you set a standard data type variable for the output terminal, you can set either a safety data type
variable or a standard data type variable for the input terminal.
Instruction Name FB/FUN Graphic expression
WORD_TO_DINT Convert WORD
to DINT FUN
Variables
Name I/O Description Valid range Default
In Data to con-
vert Input Data to con-
vert WORD#16#0000 to FFFF WORD#16#0000
Out Conversion
result Output Conversion
result DINT#0 to 65535 DINT#0
Boolean Bit strings Integers Durations
BOOL SAFEBOOL BYTE SAFEBYTE WO
RD
SAFEWORD DWORD SAFEDWORD INT SAFEINT DINT SAFEDINT TI
ME
SAFETIME
In OK OK
Out OK OK
Function
Additional Information
Precautions for Correct Use
WORD_TO_DINT