Omron NA5-12W series, Руководство пользователя по оборудованию

Страница: 137 / 156

5 - 13
5 Troubleshooting
NA-series Programmable Terminal Hardware User’s Manual (V117)
5-
2 T
rou
b
lesh
oot
ing
5
5-
2-5 T
roubleshooting NA Unit Err
ors
E_LOG_005: Failed to
write XXX records to
file: XXX Logging the data failed. • Insert an SD Memory Card or USB Memory Device
into the NA Unit.
• Replace the SD Memory Card or USB Memory
Device with one with sufficient available space.
If the same message is displayed even if you perform
the above corrections, try replacing the SD Memory
Card or USB Memory Device.
E_LOG_007: Failed to
create log file for XXX
E_LOG_006: Logging
for XXX has been
stopped Initialization for data log-
ging failed. Restart the NA Unit. If the same message is displayed
after the restart, execute system recovery. If the same
message is displayed even after system recovery, the
NA Unit must be repaired. Inquire at the contact given
on the back of this manual.
E_MED_001: The for-
mat of the video file
XXX used in XXX is not
supported. The video file has an
unsupported format or is
in an illegal state. Convert the file to a supported format and download
the data again.
E_MED_003: Failed to
play the video
(0xXXXXXXXX).
E_MED_004: Failed to
pause the video
(0xXXXXXXXX).
E_MED_005: Failed to
stop the video
(0xXXXXXXXX).
E_MED_006: Unex-
pected error in media
player XXX.
E_MED_007: Failed to
initialise the media
player. Check if the
video file exists and its
format is supported.
E_RCP_001: Failed to
import Recipe csv file
XXX. Ingredients do
not match template
XXX.
A recipe is set incorrectly. Select the correct template when you save the recipe.
E_SYS_999: Runtime
Exception Caught XXX Illegal processing was
performed. Restart the NA Unit.
E_SEC_001: Invalid
User XXX or password. An unregistered user
attempted to log in. Log in as a registered user.
E_SEC_002: Detected
permission that is
invalid for User XXX
under the current HMI
settings. The user attempted to use
an object for which the
user does not have per-
mission. Log in as a user that has permission set for the object.
E_SEC_003: Login
blocked for XXX min-
utes. Incorrect passwords were
consecutively entered too
many times. Wait for the displayed length of time and then try to log
in again.
E_PAG_007: Error
occurred while evaluat-
ing expression for
action XXX of object
XXX on page XXX. An invalid expression is
set for the expression for
an object. Please check the syntax to set for expressions.
Output message Cause Correction