1 - 3
1 System Configurations and Startup Procedures
NA-series Programmable Terminal Startup Guide (V120)
1-2 Syst
em C
onf
igu
ration
s an
d
Un
its
f
o
r U
se
1
1-2
System Configurations and Units for
Use
The system configurations that are used in this guide are shown in the following figure. To use the HMI,
connect a computer running the Sysmac Studio to the USB port of the HMI.
The models of the devices that are used in the system configurations shown above are given in the fol-
lowing table. Refer to the manuals for the individual devices that you will use for information on select-
ing the actual devices.
Devices That Are Used
Name
Model
Manual name
NA-series Programmable
Terminal
NA5-12W101B (version 1.02)
NA-series Programmable Terminal
Hardware User’s Manual
(V117)
Power Supply Unit
S8VS Series
---
NJ-series CPU Unit
NJ501-1500 (version 1.01)
NJ-series CPU Unit Hardware User’s
Manual
(W500)
NJ-series Power Supply
Unit
NJ-PA3001
Ethernet cable
Commercially available Ethernet cable
*1
*1. Use a category 5 cable.
---
USB cable
Commercially available USB cable
*2
*2. Use a USB 2.0 (or 1.1) cable (A connector - B connector) that is 5.0 m or shorter.
Automation Software
Name
Number of licenses
Model
Sysmac Studio Standard Edition version 1.13
None (media only)
SYSMAC-SE200D
1 license
SYSMAC-SE201L
Commercially
available USB cable
Ethernet cable
HMI
24 VDC
(e.g., S8VS)
NJ-series Controller
• Power Supply Unit
• CPU Unit
Sysmac Studio
Sysmac HMI + CPU Unit
Содержание NA5-12*101 series
