19
5-2-2 Installation to Screen
This IAG is intended to be used as the following:
When the button for GI-S Series Unit, which is displayed by the IAG “EtherNet_IP_Network
Monitor” or IAG” DLR_Monitor” located on another page, is pressed, the currently
displayed page switches to the page with this IAG and the IAG accesses to the Unit to
receive the necessary information to display.
Pressing the
Back
button in a page works as the trigger to back to the previously displayed
screen.
To use these functionalities, implement the settings described below.
Events and Actions Settings for IAG on the page before transition
Set the action
ShowPage
for the event SelectGI_S in IAG “EtherNet_IP_NetworkMonitor” or
IAG “DLR_Monitor” and enter the page name in which the IAG is placed.
Event
Description
SelectGI_S
Executed when a GI-Series Unit is selected.
Property Assignment for IAG on the page before transition
Assign the following properties (Input/Output) of IAG “EtherNet_IP_NetworkMonitor” or IAG
“DLR_Monitor” to the following variable.
Property (Input/Output)
Description
Variable Name
Data Type
SelectDeviceIPAddress
IP address of the displayed unit
SelectDeviceAddress
String
CurrentPageName
Page name where this IAG is located
PreviousPageName
String
Property Assignment for IAG “DLR Monitor”
Assign the following properties (Input/Output) of this IAG to the following variable.
Property (Input/Output)
Description
Variable Name
Data Type
SelectDeviceIPAddress
IP address of the displayed unit
SelectDeviceAddress
String
PreviousPageName
Page name that changes after the end of
this page
PreviousPageName
String
The IP address and the page before transition information is shared by this operation.
Enter the name of
the page where the
IAG is placed.