➊
Prepare the unit
Open the battery compartment and insert batteries.
Ensure polarity (+/-) of the batteries is correct.
Insert air tube to air jack (on the left side of the
device). The cuff must be airless.
➋
Switching on the unit
When you press the (
) button all the symbols on
the display light up for approximately two seconds in
order to check the display.
Then all the symbols disappear and the air release
symbol (
) begins to flash.
When preparations for measurement are complete
the (
) symbol appears in the display to indicate
that the monitor is ready.
Air Jack
Air Plug
(Connects
to the
air jack)
Measuring your
blood pressure
English
5
SYS
PULSE
/min
M5
-I
START
mmHg
DIA
mmHg
inslag opmaak drukkerij 12-09-2000 12:00 Pagina 5