Omron K35-2, Руководство пользователя

Страница: 115 / 186

Functions and Oper
ations
5.17 Reversing Output Logic
5-53
5.17 Reversing Output Logic
The output logic reversal function sets the logic of comparative outputs
for comparative results.
The comparative outputs will turn OFF if an input error occurs when
“open in alarm” is set.
Parameter Setting Procedure ]
Advanced function setting level
Parameter
Set
value
Operation
Comparative
result
Comparative
output status
Comparative
output
Output
logic
out-n
Close
in
alarm
n-o
ON ON ON
OFF OFF OFF
Open
in
alarm
n-c
ON ON OFF
OFF OFF ON
R P C
out-n
L
f
(OUT-N)
3 s min.
A Press the
L
[LEVEL] Key for at least 3 s in RUN level to move to
the initial setting level.
• “
L
0
” is displayed on the level/bank display to indicate the initial
setting level.
B Press the
M
[MODE] Key several times to change the PV display
to “
amov
.”
• This parameter is not displayed for the initial status due to
setting level protect.
Refer to "5.34 Limiting Key Operations" (P.5-84) for information
on removing setting level protect.
C Press the
S
[SHIFT] Key to make the SV display flash.
• The setting can be changed when the SV display starts to
flash.
D Use the
U
[UP] and
S
[SHIFT] Keys to set the password “
-
0169
.” Press the
M
[MODE] Key to move to the advanced
function setting level.
• “
L
f
” is displayed on the level/bank display to indicate the
advanced function setting level.
E Press the
M
[MODE] Key several times to change the PV display
to “
out-n
.”
F Press the
S
[SHIFT] Key to make the SV display flash.
• The setting can be changed when the SV display starts to
flash.
Displays “L
0
.”
L
0
L
amov
0
L
0
M
amov
00000
L
0
S
init
Displays “L
f
.”
off
L
f
U
M
out-n
n-o
L
f
M
out-n
n-o
L
f
S