![background image](http://html1.mh-extra.com/html/omron/hem-solar/hem-solar_instruction-manual_741741020.webp)
20
3.Using the Unit
2.
Put your left arm through the cuff
loop.
Note:
If the cuff is not assembled,
pass the end of the cuff
furthest from the tubing
through the metal D-ring to
form a loop. The smooth
cloth should be on the inside
of the cuff loop.
3.
Position the arm correctly.
4.
When the cuff is positioned correctly, close the fabric fastener
FIRMLY.
1) The air tube should run
down the inside of your
forearm and be in line with
your middle finger.
2) The bottom of the cuff
should be approximately 1
to 2 cm above your elbow.
3) Apply the cuff to your
upper arm so that the
coloured marker (blue
arrow under tube) is
centered on the middle of
your inner arm and points
down the inside of the
arm.
HEM-4500-SOLE_main.book Page 20 Tuesday, February 3, 2009 1:30 PM