10
2. Preparation
Battery Life & Replacement
If the battery low symbol (
) appears on the display,
replace all four batteries at the same time.
- When the battery low symbol (
) starts to blink, you
will still be able to use the unit for a short while. You
should replace the batteries with new ones ahead of
time.
- When the symbol (
) remains lit, the batteries are
exhausted. You should replace the batteries with new
ones at once.Turn the unit off before replacing the
batteries.
• Remove the batteries if the unit will not be used for three
months or more.
• If the batteries have been removed for more than 30
seconds, the Date/Time setting will need to be reset. See
page 14 for details.
• Dispose of batteries according to applicable local
regulations.
Four new
“
AA
”
alkaline batteries will last for approximately
1400 measurements, when used to take six measurements a
day.
Since the supplied batteries are for monitoring use only, they
may have a shorter life and not last for 1400 measurements.
HEM-7080-C1_B_M.fm Page 10 Tuesday, March 9, 2010 9:05 AM
