background image

72

WARRANTY INFORMATION

LIMITED WARRANTIES

Your Omron

®

HEM-670ITCAN Wrist Blood Pressure Monitor with Advanced

Positioning Sensor (APS

®

) and, PC Software, excluding the monitor cuff and the

Omron Health Management Software, is warranted to be free from defects in materials
and workmanship appearing within 5 years from the date of purchase, when used in
accordance with the instructions provided with the monitor. The monitor cuff is
warranted to be free from defects in materials and workmanship appearing within
one year from the date of purchase when the monitor is used in accordance with
the instructions provided with the monitor. The above warranties extend only to
the original retail purchaser.
The Limited Warranties will not apply if the damage is caused by subjecting the
product to any but the specified power source or voltage; old or worn batteries;
alterations or repairs by unauthorized persons; misuse, abuse, damage during
transit, lack of reasonable care with respect to the product, failure to follow the
written instructions enclosed and professional use.
We will, at our option, repair or replace without charge any monitor or monitor
cuff covered by the above warranties. Repair or replacement is our only
responsibility and your only remedy under the above warranties.
To obtain warranty service contact Customer Service by calling 

1-800-634-4350

for

the address of the repair location and the return shipping and handling fee.
Enclose the Proof of Purchase. Include a letter, with your name, address, phone
number, and description of the specific problem. Pack the product carefully to
prevent damage in transit. Because of possible loss in transit, we recommend
insuring the product with return receipt requested.

ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF
THE APPLICABLE WRITTEN WARRANTY ABOVE.

Some states do not

allow limitations on how long an implied warranty lasts, so the above limitation may
not apply to you.

OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHER
INCIDENTAL, CONSEQUENTIAL OR INDIRECT COSTS, EXPENSES
OR DAMAGES.

Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which may vary from state to state.

FOR CUSTOMER SERVICE

Visit our web site at:

www.omronhealthcare.com

Call toll free:

1-800-634-4350

HEM-670ITCAN_EN_FR_Q6_r2.qxd  5/18/09  1:41 PM  Page 72

Содержание HEM-670ITCAN











































































Отзывы: