Omron HEM-637, Инструкция по эксплуатации

Страница: 23 / 32

23
Memory Reset Function
Deletes all the measurement values stored in this monitor. Do not delete them
in a normal situation.
• Please note, deleted measured values cannot be restored.
1.
Push the SET button while the power is turned off.
Keep pressing the button until Delete Data Screen
is displayed.
2.
Select YES or NO.
• The initial setting of the monitor is NO at any time.
For selecting YES
Push the button to set to YES.
If you push the SET button, a screen asking "ARE
YOU SURE?" is displayed for reconfirmation.
Push the button again to set to YES.
• To cancel, push the button to NO.
If you select YES in Are You Sure Screen following
Delete Data Screen and push the SET button, the
display changes to Data Deleted (Blank) Screen.
All the data in memory is deleted, and then the
power will be turned off.
• If you select NO and push the SET button, the data
in memory are not deleted and the display changes
to Reset Settings Screen
.
All Memory
Erasure Screen
All Memory
Erasure YES Screen
Are You Sure
YES Screen
Data Deleted
(Blank) Screen