2
H8CA-S
H8CA-S
■
Accessories (Order Separately)
Specifications
■
Ratings
Note:
1.
On power application, the following inrush current flows for 0.5 ms.
3.7 A at 240 VAC, 2.3 A at 120 VDC
2.
The source current output from each input terminal when using no-voltage input is 2 mA max.
Description
Part number
Sockets
11-pin
Bottom surface or track mounting, top screw terminals
P2CF-11
Bottom surface or track mounting, top screw terminals, finger safe terminal
conforms to VDE0106/P100
P2CF-11-E
Back mounting, for use with Y92F-30 mounting adapter, bottom screw
terminals
P3GA-11
Panel mounting adapter
Fits behind panel, ideal for side-by-side installation. Use P3G
❑
-
❑
sockets
Y92F-30
NEMA 4 cover
Waterproof front cover
Y92A-48N
Mounting track
DIN rail, 50 cm (1.64 ft) length; 7.3 mm thick
PFP-50N
DIN rail, 1 m (3.28 ft) length; 7.3 mm thick
PFP-100N
DIN rail, 1 m (3.28 ft) length; 16 mm thick
PFP-100N2
End plate
PFP-M
Spacer
PFP-S
Supply voltage
AC
24 to 240 VAC, 50/60 Hz
DC
12 to 120 VDC (20% max. permissible ripple)
Operating voltage range
90 to 110% of rated voltage
Power consumption (See Note 1.)
Approx. 2.2 VA (at 240 VAC, 50 Hz)
Approx. 1 W (at 120 VDC)
Max. counting speed of CP1 and CP2
In counter function mode:
30 cps (contact and solid-state inputs):
Minimum pulse width: 16.7 ms (ON/OFF ration: 1:1)
1 kcps (solid-state input):
Minimum pulse width: 0.5 ms (ON/OFF ratio: 1:1)
Reset system
External reset (common to contact and solid-state inputs) and manual reset
Minimum reset signal width: 20 ms
Start and gate response time
In timer function mode:
Start and gate response time (common to contact and solid-state inputs):
L-type: 16.5 ms
H-type: 0.5 ms
Count and reset inputs for counter
function/ start and gate inputs for timer function
No-voltage input: (See Note 2.)
Maximum short-circuit impedance: 1 k
Ω
Short-circuit residual voltage: 0.5 V max. (1.3 V max.)
Minimum open impedance: 100 k
Ω
Voltage input:
5 to 30 V at “High” level
0 to 2 V at “Low” level
Input impedance: Approx. 4.7 k
Ω
Control output
Contact output type: SPDT 250 VAC 3 A p.f.=1 (resistive load)
Solid-state ouput type: Open collector 30 VDC max. 100 mA max.
Approvals
UL / CSA / SEV
