Omron H8BM Series, Руководство пользователя

Страница: 2 / 13

H8BM H8BM
2
Specifications
Item H8BM-B, H8BM-BP H8BM-BD, H8BM-BDP
Classification 3-stage setting 1-stage setting
Mounting method Flush mounting
External connections Screw terminals
Enclosure ratings IP54F (panel surface)
Display mode Up display
Output mode F mode
Reset system External, manual resets
Timing function Yes
Input signal method Voltage inputs: High and low signal voltages (count, reset, re-monitor, counter select, I/O inhibit)
Control output No-contact outputs: NPN outputs (RUN, forecast,
machine stoppage) (PNP outputs for -BP) No-contact outputs: NPN outputs (RUN, forecast)
(PNP outputs for -BDP)
Display Count, preset value, counter number, and error codes displayed on 7-segment LCD Power-ON, mode,
reset, I/O inhibit, and re-monitor modes displayed on LCD characters
Output indication on LCD characters and LEDs
LCD with backlight Yes
Built-in counter number 9 (counters 1 to 9) (see Note 1)
Number of stages 3 stages (see Note 2) 1 stage (see Note 5)
Digits Forecast value: 6 digits (999999)
Pre-forecast value: –5 digits (see Note 3)
Machine stoppage: +5 digits (see Note 4)
6 digits (999999)
Max. time settings Forecast value: 99999.9 hr (0.1 hr or more)
Pre-forecast value: –9999.9 hr (see Note 3)
Machine stoppage: +9999.9 hr (see Note 4)
99999.9 hr (0.1 hr or more)
Memory backup Backup time for power interruption: Approx. 10 years at 25
°
C
Approved standards UL508, CSA C22.2 No.14
Note: 1. Each channel operates on an separate I/O.
2. Pre-forecast: Displayed only on LCD (No external output is provided.)
Forecast: Displayed on LCD and LED and output (Output for each Counter)
Machine stoppage: Displayed on LCD and LED and output
(Output when the count value of one or more of Counters 1 to 9 has reached its machine stoppage value.)
3. The pre-forecast value is set as a negative offset in respect to the forecast value.
4. The machine stoppage value is set as a positive offset in respect to the forecast value.
5. This model operates on the forecast value only.
Ratings
Rated voltage 24 VDC
Operating voltage range 85% to 110% of rated voltage (see Note 1)
Power consumption Approx. 1.8 W (at 24 VDC) (see Note 2)
Max. counting speed 30 cps (ON:OFF = 1:1)
Min. input signal width Counter No. selection input: 16.7 ms max.
Reset input: 100 ms max.
Re-monitor input: 30 ms max.
Output number request input: 30 ms max.
I/O inhibit input: 16.7 ms max.
One-shot output time 20 ms (see Note 3)
Count, reset, re-monitor,
output number request, and
I/O inhibit input Voltage input (see Note 4) (input resistance: approx. 2.2 k
Ω
)
High level: 16 to 30 VDC
Low level:
0 to 3 VDC
Control output Open-collector output: 100 mA max. at 30 VDC max.
Case color Light gray (Munsell 5Y3/1)
Note: 1. Ripple content: 20% max.
2. On power application, an inrush current of approx. 1.2 A flows into the Counter.
3. This signal is output as a carry signal when the Counter is used as a totalizing counter.
4. This signal can also be used as a no-voltage input signal depending on the wiring (refer to Input Connections).