Omron H7CZ Series, Руководство пользователя

Страница: 15 / 20

H7CZ
15
Note: 1. When the present value reaches 999999, it returns to 0.
2. Counting cannot be performed during reset input.
3. If reset is input while one-shot output is ON, one-shot output turns OFF.
4. If there is power failure while output is ON, output will turn ON again when the power supply has recovered.
For one-shot output, output will turn ON again for the duration of the output time setting once the power supply has recovered.
5. Do not use the counter function in applications where the count may be completed (again) while one-shot output is ON.
6. The setting range is 0 to 999,999.
Self-holding
output
One-shot
(The one-shot output time can be
set in the range 0.01 to 99.99s.)
Input mode
Operation after
count completion
UP DOWN
Output
mode
setting
P
The present value
display does not
change during the
one-shot output time
period, but the actual
count returns to the
reset start status.
The output will return
to one-shot mode.
The outputs repeat
one-shot operation.
Q
The present value
continues to increase/
decrease for the one-
shot output time, but
returns to the reset
start status after the
one-shot output time
has elapsed.
The outputs repeat
one-shot operation.
A
The present value
display and OUT self-
holding output is held
until reset is input.
0
Reset
OUT
999999
Set value
0
Reset
OUT
999999
Set value
0
Reset
OUT
999999
Set value