![background image](http://html1.mh-extra.com/html/omron/g9sx-ns/g9sx-ns_brochure_742397020.webp)
D40A/G9SX-NS
20
Fault Detection
When the Non-contact Door Switch Controller detects a fault, the ERR indicator and/or other indicators light up or flash to inform the user a
b
out
the fault.
Check and take necessary measures referring to the following ta
b
le, and then re-supply power to the Non-contact Door Switch Controller.
(G9SX-NS202-
@
/NSA222-T0
3
-
@
)
ERR
indicator
Other
indicator
Fault
Expected causes of the fault
Check points and measures to take
Flashes
---
Fault due to
electromagnetic
distur
b
ance or of internal
circuits.
1. Excessive electromagnetic
distur
b
ance
2. Failure of the internal circuit
1. Check the distur
b
ance level around the G9SX
and the related system.
2. Replace with a new product.
Li
g
hts
T1 flashes
Fault involved with safety
input 1
1. Error in the wiring of safety input 1
2. Incorrect setting of cross fault
detection input
3
. Failure of the circuit of safety input 1
1. Check the wiring to T11 and T12.
2. Check the wiring to Y1.
3
. Replace with a new product.
T2 flashes
Fault involved with safety
input 2
1. Error in the wiring of safety input 2
2. Incorrect setting of cross fault
detection input
3
. Failure of the circuit of safety input 2
1. Check the wiring to T21 and T22.
2. Check the wiring to Y1.
3
. Replace with a new product.
NS
flashes
Fault involved with
Non-contact Door Switch
input
1. Error in the wiring of Non-contact
Door Switch input
2. Error in the wiring of Non-contact
Door Switch inputs in series
connections.
3
. Failure of the internal circuits of
Non-contact Door Switch inputs
4. Failure of the Non-contact Door
Switch
1. Check the wiring to D1 and D2.
2. Check the wiring to the D40A.
3
. Replace with a new product.
4. Replace with a new D40A.
FB
flashes
Fault involved with
feed
b
ack/reset inputs
1. Error in the wiring of feed
b
ack/reset
input.
2. Failure of the circuit of feed
b
ack/
reset input
1. Check the wiring to T
3
1, T
3
2 and T
33
.
2. Replace with a new product.
Fault in Expansion Unit
1. Improper feed
b
ack signals from
Expansion Unit
2. A
b
normal supply voltage to
Expansion Unit
3
. Failure of the circuit of safety relay
contact outputs
1. Check the connecting ca
b
le of Expansion Unit
and the connection of the termination socket.
2. Check the supply voltage to Expansion Unit.
Note:
Make sure that all Expansion Units' PWR
indicators are lit.
3
. Replace with a new product.
EI flashes
Fault involved with
instantaneous safety
outputs, logical AND
connection outputs, or
auxiliary monitor output
1. Error in the wiring of instantaneous
safety outputs
2. Failure of the circuit of instantaneous
safety outputs
3
. Error in the wiring of the logical AND
connection output
4. Failure of the circuit of the logical
AND connection output
5. Error in the wiring of the auxiliary
monitor output
6. Impermissi
b
le high am
b
ient
temperature
1. Check the wiring to S14 and S24.
2. Replace with a new product.
3
. Check the wiring to L1.
4. Replace with a new product.
5. Check the wiring to X1.
6. Check the am
b
ient temperature and spacing
around the G9SX.
ED
flashes
Fault involved with
OFF-delayed safety
outputs
1. Error in the wiring of OFF-delayed
safety relay contact outputs
2. Incorrect set values for OFF-delay
time
3
. Failure of the circuit of OFF-delayed
safety relay contact outputs
4. Impermissi
b
le high am
b
ient
temperature
1. Check the wiring to S44 and S54.
2. Check the settings of the OFF-delay time setting
switch.
3
. Replace with a new product.
4. Check the am
b
ient temperature and spacing
around the G9SX.