82
Power Controllers
G3PX
4. Loosen the screws on both corners.
5. Hold the indented part of both corners to dismount the Cartridge.
Mounting
1. Apply silicone grease (provided with the G32X-A) to the entire
surface of the heat sink.
2. Make sure there is no dust or pieces of wire on the heat sinks of
the G32X-A or the G3PX.
3. Insert the Cartridge into the opening of the G3PX so that the
letters on the Cartridge and those on the G3PX are in the same
direction and sides A and B are even.
4. Tighten the screws on both corners with a tightening torque of
0.59 to 0.78 N·m.
5. Tighten the center screws of the G3PX with a tightening torque of
0.59 to 0.78 N·m.
6. Attach the terminal cover.
7. Switch on the power and check the G3PX to be sure it works
properly.
■
External Variable Resistor
The G32X-V3K and G32X-V2K are provided with a set consisting of
adjuster, knob, and nameplate.
Note: 1. The G32X-V3K is equivalent to the conventional G32X-VR.
2. Resistive Value
Loosen
Loosen
A
B
Resistive value
(See note 1.)
Model
3 k
Ω
G32X-V3K (See note 2.)
2 k
Ω
G32X-V2K
The resistance is
read on the back of
the variable resistor.
2.5±1
10±1
20±1
1.6±0.2
1±0.1
M9P0.75
12±0.2
17
14
6.5
1.6
13.4
26
34
12±0.2
G32X-VR
100
%
48
48
External DUTY Adjuster
Knob
Mounting Holes
Nameplate
31±1 dia.
15 min.
17 max.
R26 max.
2.8±0.2 dia.
12±0.2
30 max.
6 dia.
0
−
0.1
3 dia. hole
9.5 dia. hole
Filled with
white resin