Omron FZ4 Series Скачать руководство пользователя страница 94

Страница: 94 / 656

Performing

Test

Measurement/Starting

Operation

Useful Functions for Operation

FZ4 User's Manual

Change the judgement conditions of each processing unit.

Tap [OK].

The Judgement window closes, and the screen returns to the Main screen.

The changed contents are shown in the displayed scene.

When changing judgement conditions for multiple processing units, repeat steps
Reference:

3 (p.91) to Reference:

5 (p.92) .

In the "Control" area of the Main screen, tap [Quit simplified non-stop adj.].

The simplified non-stop adjustment mode ends.

Note

●

If [Switch to ADJUST mode] is tapped while entering simplified non-stop adjustment, the simplified

non-stop adjustment mode is automatically ended and the screen switches to the ADJUST window.

Important

●

During simplified non-stop adjustment, do not switch the scene with scene switching or scene group switching.

Changing Regions as a Batch [Shift area]

Figure data for multiple processing items can be changed as a batch.

Tap [Shift area] in the Edit Flow window.

The Move Measuring Area at Once window is displayed.

Acesst 1.0 6251194

Содержание FZ4 Series

















































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FZ4 Series

Отзывы:

Omron FZ4 Series, Руководство пользователя, Страница: 94 / 656

Результаты поиска

Содержание FZ4 Series

Отзывы: