Omron FZ4 Series Скачать руководство пользователя страница 29

Страница: 29 / 656

Before

Operation

FZ4 User's Manual

Returning Controller to Factory Settings

All controller settings can be restored to factory default status (initialization).
In addition, the controller can be restarted.

●

Reference:

Initializing Controller [System Initialization] (p.27)

●

Reference:

Restarting Controller [System Restart] (p.27)

Initializing Controller [System Initialization]

Restores the controller to factory default status. Before initialization, back up required data such as
scene data and system data.
Reference:

Saving Settings Data to RAMDisk/USB Device (p.334)

On the Main screen, tap [System] - [Controller] - [System initialization].

The System Initialization window is displayed.

Tap [Execute].

A confirmation window is displayed.

Tap [Yes].

The controller is initialized and restarts.

Restarting Controller [System Restart]

Restart the controller. Before restarting, back up required data such as scene data and system data.
Reference:

Saving Settings Data to Controller Memory (p.332)

On the Main screen, tap [System] - [Controller] - [System restart].

The System Restart window is displayed.

Tap [OK].

The controller restarts.

Acesst 1.0 6251194

Содержание FZ4 Series

















































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FZ4 Series

Отзывы:

Omron FZ4 Series, Руководство пользователя, Страница: 29 / 656

Результаты поиска

Содержание FZ4 Series

Отзывы: