Omron FQ2 Series, Руководство пользователя

Страница: 205 / 516

Monitoring the Signal I/O Status
FQ2 User’s Manual
203
7
Con
v
enie
n
t Function
s
7-4 Monitoring the Signal I/O Status
You can check if the I/O connections are working normally.
[In/Out]
−
[I/O monitor]
−
[I/O monitor]
1
The I/O status of the external devices will be dis-
played.
2
Press the [OK] Button to return to the [Communica-
tion check] Display.
When the Sensor Data Unit is connected, the I/O status of the following signals are displayed.
FQ-SDU1
@
: TRIG, DSA, RST, IN0 to IN7,
RUN, OR, BUSY, ERR, STG, SHT, ACK, GATE, and D0 to D15
FQ-SDU2
@
: TRIG, RST, IN0 to IN5,
RUN, OR, BUSY, ERR, STG, SHT, and ACK
O u tp u t Signals
(OUT0, OUT1, and OUT2)
Signals that are displayed in red are
c
u rrently b eing o u tp u t from the Sensor
to the external de v ices.
Yo u can t u rn the signals O N and OFF
b y pressing them to test the o u tp u ts.
Inp u t Signals (TRIG and I N 0 to I N 5)
Signals that are displayed in red are
c
u rrently b eing inp u t from the
external de v ices to the Sensor.
Note