![background image](http://html1.mh-extra.com/html/omron/eq100-e/eq100-e_user-manual_744162057.webp)
3. Operation Mode and Status
3-2
3.2. Setup Status and Collecting Status
Under the normal mode, there are a "setup status" to configure settings and a "collecting
status" to collect and save measured data. Statuses transition as shown below:
Reference
- The communication test checks stable data collecting by EQ100 from measurement devices.
Before starting measured data collecting, always perform the communication test.
- The operation status can be checked by collecting status indicator on the EQ100 front end.
- The product is shipped with the setup status.
- If the power is turned off or blackout occurred under the collecting status, the system is
activated under the collecting status when the power is turned on again.
- When a status transitions from collecting to setup, unsaved collected data are saved in the
EQ100 internal memory.
- When a status transitions from collecting to setup, all of the device alarms being occurred are
cleared.
Collecting status before
Power ON/Reset
Setting Status before
Power ON/Reset
Start/Stop Communication Test
- Operation by EQ-Manager
- Operation by Web UI Screen
Startup in Normal Mode
Collecting status
Setup Status
Communication
Test
Start/Stop Collecting
- Operation by EQ-Manager
- Pressing RUN/STOP button
- Operation on Web UI screen
Содержание EQ100-E
