E8MS/E8M
2
Accessories (Order Separately)
Sensor I/O Connectors
* E8M-A1 does not require the Sensor I/O Connector.
e-CON Connector for Cable Connection
Power and Output Connector
Adapter
Sensor and Controller Combinations
Use the Pressure Controllers in the following combinations. The E89-M3/M4 is required when using the Sensor as a single unit.
Yes: Required No: Not required
* Connect the E8MS-N1 to a E89-M4-S Sensor I/O Connector. Do not connect it to a Controller. A Controller is not necessary.
Sensor and Controller Connection
Applicable model
Appearance
Model
Specifications
Unit
Remarks
E8M
E89-M3-S
*
4-pin connector with
3-m-long cable
1
Provided with one XN2A-1430 e-CON Con-
nector for Cable Connection.
E8MS
E89-M4-S
3-pin connector with
3-m-long cable
E8MS/E80-C2
E89-M4-1
3-conductor, 3-m-long
cable with connectors
on both ends
Cannot be cut or extended.
Appearance
Model
Applicable wire size (mm
2
)
Quantity
Minimum order unit
Remarks
XN2A-1430
0.08 to 0.5
1
10
The E89-M3 and E89-M4 are each provid-
ed with one XN2A-1430.
Model
Specifications
Quantity
E89-M5-S
8-pin connector with 2-m cable
1
Model
Remarks
Y92F-37-S
One Adapter is attached to
the E8M-MP8 Controller.
Hard Protective Front Cover
48 x 48 Panel Hole Adapter
Appearance
Model
Y92A-40-S
Appearance
Model
Y92F-48-S
Model
E89-M3-S
E89-M4-S
E8M-MP8
E89-M5-S
E89-M4-1
E8MS-01
No
Yes
Yes
Yes
Yes
E8MS-10
No
Yes
Yes
Yes
Yes
E8MS-N0
No
Yes
Yes
Yes
Yes
E8MS-N1
*
No
No
No
No
Yes
E8M-A1-S
No
No
Yes
Yes
No
E8M-10
Yes
No
Yes
Yes
No
E8M-N0
Yes
No
Yes
Yes
No
E89-M5-S
E89-M3/M4-S
E8MS-
@@
E8M-10/N0
E8M-A1-S
E8M-MP8
Sensor input
Controller output
Downloaded from
Downloaded from