Omron DeviceNet Safety NE1A-HDY01, Руководство по эксплуатации

Страница: 40 / 95

17
Using the Battery Pack Section 1-7
1-7-2 Charging the Battery
The battery must be charged when using the Mobile Console for the first time
or if it has not been used for a long time
1,2,3... 1. Insert the cable into the charger.
2. Insert the AC plug of the cable into an AC socket.
3. Insert the battery pack into the charger. The charger indicator will turn ON
when charging starts.
4. Charging the battery has been completed when the green indicator turns
ON.
Note The battery takes approximately 3 hours to recharge depending on the oper-
ating environment, operating conditions, and the state of the battery.
IMPORTANT Make sure that the temperature is between 0 and 40
°
C, that the humidity is
between 20% and 85%, and that there is no condensation. The battery may
not charge fully in conditions outside these ranges. It may also damage the
battery pack.
IMPORTANT The capacity of the battery reduces to approximately 60% of its original state
after recharging it 300 times. Replace the Battery Pack if the charge only lasts
for a short time.
Charger indicator
Charger Indicator
: Lit : Flashing : Not lit
Color Status Meaning
--- Battery is not inserted.
Green Charging complete
Red Charging
Error