background image

F-34

Small Sealed Switch 

D4E-

@

N

Ratings

Note: 1.

The above current ratings are for a standard current and the values in parentheses are for models with a connector.

2.

Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).

3.

Lamp load has an inrush current of 10 times the steady-state current.

4.

Motor load has an inrush current of 6 times the steady-state current.

Characteristics

Note: 1.

The above values are initial values.

2.

The above ratings may vary depending on the model. Contact your OMRON representative for further details.

3.

Durability values are calculated at an operating temperature of 5

°

C to 35

°

C, and an operating humidity of 40% to 70%. Contact your

OMRON sales representative for more detailed information on other operating environments.

Rated voltage

General-purpose

Micro load

Non-inductive load

Inductive load

Non-inductive load

Resistive load

Lamp load

Inductive load

Motor load

Resistive load

NC

NO

NC

NO

NC

NO

NC

NO

NC

NO

125 VAC

5 (1) A

1.5 (1) A

3 (1) A

2 (1) A

1 (1) A

0.1 A

250 VAC

5 (1) A

1.5 (1) A

3 (1) A

1 A

0.5 A

---

8 VDC

5 (1) A

---

1.5 (1) A

---

0.1 A

14 VDC

5 (1) A

---

1.5 (1) A

---

0.1 A

30 VDC

5 (1) A

---

1.5 (1) A

---

0.1 A

125 VDC

0.5 A

---

0.05 A

---

---

250 VDC

0.25 A

---

0.03 A

---

---

Inrush current

NC

10 A max.

NO

10 A max.

Degree of protection

IP67

Durability (see note 3)

Mechanical: 10,000,000 operations min.
Electrical:

500,000 operations min. (5 A at 250 VAC, resistive load)
5,000,000 operations min. (10 mA at 24 VDC, resistive load)

Operating speed

0.1 mm to 0.5 m/sec

Operating frequency

Mechanical: 120 operations/min
Electrical:

30 operations/min

Rated frequency

50/60 Hz

Insulation resistance

100 M

 min. (at 500 VDC)

Contact resistance

15 m

 max. (initial value)

Dielectric strength

1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
1,500 VAC, 50/60 Hz for 1 min/Uimp at 2.5 kV (EN60947-5-1) between current-carrying metal parts 
and ground, and between each terminal and non-current-carrying metal part

Rated insulation voltage (Ui)

250 VAC

Switching overvoltage

1,000 VAC max. (EN60947-5-1)

Pollution degree 
(operating environment)

3 (EN60947-5-1)

Short-circuit protective device (SCPD)

10 A fuse (type gG or gI, IEC269 approved)

Conditional short-circuit current

100 A (EN60947-5-1)

Conventional enclosed thermal current 
(I

the

)

5 A (EN60947-5-1)

Protection against electric shock

Class II (grounding not required with double insulation)

Vibration resistance

Malfunction: 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance

Destruction: 1,000 m/s

2

 min.

Malfunction: 300 m/s

2

 min.

Ambient temperature

Operating: –10

°

C to 80

°

C (with no icing)

Ambient humidity

Operating: 95% max.

Weight

Approx. 86 g (in case of roller plunger)

Содержание D4E-1A20N















Отзывы: