Omron CV/CVM1, Руководство по замене

Страница: 27 / 32

Timings
- Cycle Time
Timings
- Constant Cycle Time
Specifies the cycle time. The cyle time is set
to the set time.
There is no functional difference between
the CV/CVM1 and CS.
Timings Timings
- Schedule Interrupt Interval
Set the interval of scheduled interrupt.
There is no functional difference between
the CV/CVM1 and CS.
- Scheduled Interrupt Interval
Timings
- CPU Bus Link Service
None Settings of whether to use CPU Bus Link
function. CS does not have this function.
This function is used mainly to exchange
data with BASIC Unit. Consider changing the
BASIC program to CPU Unit and sharing
data using the global variables.
Hold
- Enable Hold Area
None Set the start address and end address of
Hold area.
Hold Area (Word H000 to 511) is fixed with
CS.
Hold
- CPU
Set the hold status of Rack 0 to 7.
･ Sys Bus/2
Set the hold status of RM 0 to 3.
None Set the holding status of each Rack.
Holding status can not be set individually for
each rack or RM with CS.
･
Sys Bus
Set the hold status of RM 0 to 7.
17