Omron CS1W-HCA12-V1, Руководство по эксплуатации

Страница: 108 / 254

88
Overview
Section 6-1
6-1-2 Hold/Clear for I/O Memory Data
The following table shows when the status of the memory areas is held and
when it is cleared.
Note 1. “Operating mode changed” means between RUN or MONITOR mode and
PROGRAM mode.
2. The status of Timer Completion Flags and Timer PVs is held when the op-
erating mode changes from RUN mode or MONITOR mode to PROGRAM
mode, but it is cleared when the operating mode is changed from PRO-
GRAM mode to RUN mode or MONITOR mode.
3. It is possible to set whether data in the EM Area is held or cleared in the
Unit Setup Area (bits 12 to 15 in DM 6600).
Name Addresses External I/O
allocation
Operating
mode
changed
(See note 1.)
Fatal errors Power supply
turned ON
FALS error Other fatal
errors
Input Area IR 000 Yes Cleared Held Cleared Cleared
Output Area IR 001 Yes Cleared Cleared Cleared Cleared
Work Area IR 002 to
IR 049,
IR 200 to
IR 219 No Cleared Held Cleared Cleared
SR Area SR 220 to
SR 255 No (Refer to the individual explanations for the functions.)
AR Area AR 00 to
AR 27 No Held or cleared depending on the address.
LR Area LR 00 to
LR 31 No Cleared Held Cleared Cleared
Timer Completion
Flags TIM/CNT 000
to TIM/CNT
255 No Held
(See note 1.) Held Held Cleared
Timer PVs TIM/CNT 000
to TIM/CNT
255 No Held
(See note 2.) Held Held Cleared
Counter Completion
Flags TIM/CNT 000
to TIM/CNT
255 No Held Held Held Cleared
Counter PVs TIM/CNT 000
to TIM/CNT
255 No Held Held Held Held
DM Area General-
purpose
read/write
words DM 0000 to
DM 6143 No Held Held Held Held
General-
purpose
read-only
words DM 6200 to
DM 6599
Error Log
Area DM 6144 to
DM 6199
Unit Setup
Area DM 6600 to
DM 6655
EM Area EM 0000 to
EM 2047 No According to
setting.
(See note 3.) According to
setting.
(See note 3.) According to
setting.
(See note 3.)
According to
setting.
(See note 3.)