manualshive.com logo in svg

Omron CJ2H-CPU6 - REV 02-2010, Руководство по эксплуатации, Страница: 203 / 464

Поделиться
Скачать
Omron CJ2H-CPU6 - REV 02-2010 Скачать руководство пользователя страница 203

177

Setting Tag Data Links

Section 6-2

3.

Select Device - Reset. The following dialog box will be displayed.

• Clicking the Yes Button:

The following dialog box will be displayed.

Select one of the following options and click the OK Button.

• Emulate cycling power

Restarts the Unit.

• Return to the out-of-box configuration, and then emulate cycling power

Returns the Unit to its factory default settings, and restarts the Unit.

• Clicking the No Button:

The device parameters are not cleared or reset.

6-2-15 Saving the Network Configuration File

Device parameters set in the Network Configurator, or device parameters
uploaded from the network can be saved as a network configuration file.

1,2,3...

1.

Select File - Save As. The following dialog box will be displayed.

The File name Field will contain Untitled.nvf as the default file name.

2.

Input the file name, and click the Save Button.

Содержание CJ2H-CPU6 - REV 02-2010

















































































































































































































































































































































































































































































Отзывы:

Нет отзывов