Omron CJ1W-CTL41-E, Инструкции по эксплуатации

Страница: 98 / 133

Supported IOWR/IORD-Instructions
Section 4-5
81
4-5 Supported IOWR/IORD-Instructions
4-5-1 DM-data
4-5-1-1 DM-words Used for IOWR/IORD
Memory
Location
Item IOWR IORD Control Code No. of
Words
CC1 CC2
General
m Output Control Mode N N --- --- ---
AND/OR Counter Output Patterns N N --- --- ---
m+1 Interrupt Task Offset (outputs) N N --- --- ---
m+2, m+3 Interrupt Mask Outputs Y Y 0B 01 2
m+4 to m+9 Not used --- --- --- --- ---
Coun
te
r 1
m+10 Counter Type N N --- --- ---
m+11 Signal Type N N --- --- ---
m+12 Z-reset Mode Y Y 1E 01 1
Overflow/Underflow error-code generation N N --- --- ---
m+13, m+14 Max. Count Value Circular/Linear Y Y 1C 03 2
m+15, m+16 Min. Count Value Linear Y Y 1C 04 2
m+17, m+18 Power On Preset Value N N --- --- ---
m+19, m+20 Range / Comparison Enable Data Y Y 1B 03 2
m+21, m+22 Output (P)reset Set Pattern N N --- --- ---
m+23, m+24 Output (P)reset Reset Pattern N N --- --- ---
m+25 Hysteresis N N --- --- ---
m+26 # Ranges / # Comparison Values N N --- --- ---
m+27 Memory Area N N --- --- ---
m+28, m+29 Memory Address N N --- --- ---
Co
unter 2
m+30 Counter Type N N --- --- ---
m+31 Signal Type N N --- --- ---
m+32 Z-reset Mode Y Y 2E 01 1
Overflow/Underflow error-code generation N N --- --- ---
m+33, m+34 Max. Count Value Circular/Linear Y Y 2C 03 2
m+35, m+36 Min. Count Value Linear Y Y 2C 04 2
m+37, m+38 Power On Preset Value N N --- --- ---
m+39, m+40 Range / Comparison Enable Data Y Y 2B 03 2
m+41, m+42 Output (P)reset Set Pattern N N --- --- ---
m+43, m+44 Output (P)reset Reset Pattern N N --- --- ---
m+45 Hysteresis N N --- --- ---
m+46 # Ranges / # Comparison Values N N --- --- ---
m+47 Memory Area N N --- --- ---
m+48, m+49 Memory Address N N --- --- ---