16
(1) Remove the protective cover at the right side viewed form the back of the additional battery unit.
(2) Remove the protective cap of the connection cable running from the back of the additional battery unit.
2-2
Connecting the additional battery unit
Protective cover
(3) Fix the cable holder of the connection cable to the back of the UPS with screws, and connect the battery
addition connector and battery addition signal connector at the back of the UPS.
(4)
Mount the protective cap that was removed on Procecdure (2).
M3
screw
BU100RE
BUM100RE
Overcurrent protection switch
Battery addition signal cable
Battery addition connector
Battery addition signal connector
Cable holder
Additional battery cable
* It is mounted diagonally to prevent
too much protrusion.
Protective cap
M3 screw
When the unit is used in compliance with UL standards,
connecting
of
an additional
battery unit should be
performed or supervised by personnel familiar with the danger of batteries and the required precautions.
