21
3. USING THE DEVICE
Using the Guest Mode
The monitor stores measurement values for 2 users in the memory.
The guest mode can be used to take a single measurement for another user. No
measurement values are stored in the memory when the guest mode is selected.
1.
Press and hold the START/STOP
button for more than 3 seconds.
The USER ID symbol and the Date/Time
display will disappear.
2.
Release the START/STOP button when the Date/Time display
turns off.
The arm cuff will start to inflate automatically.
DO NOT adjust medication based on measurement results from this blood
pressure monitor. Take medication as prescribed by your physician. Only a
physician is qualified to diagnose and treat High Blood Pressure.
This device is not intended to be a diagnostic device.
Always consult your physician. Self-diagnosis of measurement results and self-
treatment are dangerous.
Inflating to a higher pressure than necessary may result in bruising where the
arm cuff is applied.
