A22TK
14
Others
• If the panel is to be coated, make sure that the panel meets the
specified dimensions after coating.
• Due to the structure of the Switch, severe shock or vibration may
cause malfunctions or damage to the Switch.
Also, most Switches are made from resin and will be damaged if
they come into contact with sharp objects. Particularly scratches
on the Operation Unit may create visual and operational
obtrusions.
Handle the Switches with care, and do not throw or drop them.
• Perform maintenance inspections periodically.
• Do not use the key switch to stop/start the machine.
• Mode switching by key must be performed by the operator
specified in the operating manual.
• Apply load current not to exceed the rated value.
• The contact ON/OFF timing is not synchronized. Confirm
performance before application.
Do not place or drop
heavy objects
on the Switch.
Do not operate the Switch
with hard or sharp objects.
Screwdriver
Hammer
Do not allow the Switch
to drop and hit the floor.
