HS-360X Four-Slot Spare Battery Charger Quick Start Guide
7
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to Model Number: SAC3600. All Zebra devices are designed to be
compliant with rules and regulations in locations they are sold and will be labeled as required.
Local language translations can be requested at:
http://www.microscan.com/support
.
Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could
void the user’s authority to operate the equipment.
For use only with Omron Microscan-approved and UL-listed/recognized battery packs.
Power Supply
Use only an Omron Microscan-approved UL-LISTED ITE (IEC/EN 60950-1) power supply
with electrical ratings: Output 12 Vdc, min 4.6A, with a maximum ambient temperature of at
least 50 degrees C. Use of alternative power supply will invalidate any approvals given to this
device and may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection Administration) requires dry battery producing or importing
firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the
recycling marks on the batteries used in sales, giveaway, or promotion. Contact a qualified
Taiwanese recycler for proper battery disposal.
Battery Information
Use only Omron Microscan-approved batteries. Accessories which have battery charging
capability are approved for use with the following battery models: Part Number
12-9000939-01 (3.6 Vdc, TYP. 3150 mAh, MIN. 3100 mAh).
Omron Microscan-approved rechargeable battery packs are designed and constructed to the
highest standards within the industry.
However, there are limitations as to how long a battery can operate or be stored before
needing replacement. Many factors affect the actual life cycle of a battery pack such as heat,
cold, harsh environmental conditions, and severe drops.
CAUTION
Only use Omron Microscan-approved and UL-Listed accessories,
battery packs, and battery chargers.
Do NOT attempt to charge damp/wet batteries.
All components must be dry before connecting
to an external power source.
Declared maximum operating temperature: 50°C.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of batteries according to instructions.
