• Do not begin the installation until you have read and understood all the
instructions and warnings contained in this installation sheet. If you have any questions
regarding any of the instructions or warnings, please contact your local distributor.
• This mounting bracket was designed to be installed and utilised ONLY as specified in
this manual. Improper installation of this product may cause damage or serious injury.
• This product should only be installed by someone with good mechanical
ability fully understands this manual.
• Make sure that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
Note:
We recommend installation to an internal panel. External walls may not offer the
necessary strength and may be used to route plumbing and cables. If in doubt please
consult vehicle manufacturer.
• Depending on your installation, it may be necessary to source additional fixings to
mount the wall bracket. It is the installers responsibility to ensure the fixings are
suitable for the medium the bracket is being fixed to
• Tighten screws firmly, but do not over tighten. Over tightening can cause
damage to the items, this greatly reduces their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury.
• OMP declines all responsibility in the event of incident or accident if they are due to
non-observation of the installation instructions or installation error.
SAFETY INSTRUCTIONS - PLEASE READ
Read the entire instruction manual before you start installation & assembly.
WARNING!
