Copyright © 2019 OMOROBOT Inc. All Rights Reserved.
9
2019 January 17
2019 January 17
2.2.2 CHARGING THE ROBOT
Before starting charging, please make sure OMO R1 is turned off and
connect the charger adapter to the charging port.
Always charge with supplied charger
adapter.
● Do not attempt to operate the robot
while charging.
● Charging status can be checked by
monitoring the status LED located above
the power button.
Power On and Off
When disconnecting the charger, always
pull the connector body instead of the
wire itself.
3.BASIC FUNCTIONS
3.1 CONTROLLER PRIORITY
EMERGENCY Switch
Remote Controller
Serial (UART) Control
3.2 CHECK ROBOT STATUS
LED and Buzzer can be turned ON and OFF by sending LEDEN or BUZEN command.
