manualshive.com logo in svg

Omnivision CameraChip OV9650, Руководство по внедрению

Поделиться
Скачать
Omnivision CameraChip OV9650 Скачать руководство пользователя страница 41

SCCB Interface

Version 1.1,  December 7, 2004

Proprietary to OmniVision Technologies

41

O

mni

ision

10.1.1 Register Reset

All registers can be reset to their default values by using the RESET pin (RESET to VDD_IO) or by 
using the SCCB interface (see register 

COM7

[7] (0x12)). OmniVision suggests putting the reset 

register setting (set register 

COM7 

(0x12) to 0x80) at the beginning of the sensor initialization. After 

software reset, wait 1 ms for the next register access (there is no limitation for other register 
settings).

10.1.2 Standby Mode Enable

The OV9650 C

AMERA

C

HIP

 can be placed in Standby mode by using the PWDN pin (PWDN to 

VDD_IO) or by using the SCCB interface (see register 

COM2

[4] (0x09)). Note that using the PWDN 

pin results in lower Standby current (see Electrical Characteristics in the 

OV9650 Datasheet

).

Setting register 

OFON

[3] (0x39) to high before standby can reduce the current a little bit.

10.1.2.1 Standby Mode Using the PWDN Pin

Internal device clock is halted and all internal counters are reset to their default values and all SCCB 
registers remain unchanged.

10.1.2.2 Standby Mode Using the SCCB Interface

Suspends internal circuit activity but does not halt the device clock.

10.1.3 Tri-state Enable

This bit control will immediately tri-state the data outputs. However, all internal signals will continue 
to be generated and transfer to the output as if it were active. It is the user’s responsibility to ensure 
that the tri-state command is used after all functions have completed their operation.

If the device is put into Standby mode, all outputs, including data and clock, are automatically 
tri-stated.

Содержание CameraChip OV9650

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды