Omnivision 16CH H264 DVR, Руководство пользователя

Страница: 22 / 98

OVR 4100S/8100S/6100SN v1.0 User Guide
Omnivision Pty Ltd Page 17 of 98
Item Description
Alarm Duration(Seconds)
When motion detect
，
the number of seconds continuous alarm
Motion Popup
Check the box to Enable/Disable popup screen function for all
channels. When motion is detected in LIVE mode, the detected
channel image will pop up in full screen display.
1~16 You can setup independently for each channel.
Enable Check the box to Enable/Disable motion detection for each channel.
Sensitivity
Drag the white bar or press
◀ ◀
to set up Sensitivity from val
ues 1 to 10 for each channel. The lower value you set the hig
her sensitivity it will be
Motion Area Setup Enter to setup motion detection area
3-2.1.1 MOTION AREA SETUP
The motion detection has been divided into 16x12 grids. The default detection area is fu
ll screen as marked in transparent for local DVR and purple for remote access. Areas d
eselected for motion detection are marked in red for both local and remote site.
Item Description
Mask Mouse Selection
Switch between “select” and “deselect” for cursor-dragging function
All Area Detection Select entire screen as detection area.
Mask All Area Deselect entire detection area.
Continue Continue setup
Exit & Save Save setup and leave
Exit & Discard
Cancel setup and leave