00047146.DOC, Version 1.0
28/29
6.10 Matching the beat between two titles (Pitch Bend)
With the function pitch bend, the beat of the current title can be matched (synchronized) to the beat of a
music piece playing on another player. Thus the rhythm will not be interrupted while crossfading from one
title to another. Unlike the adjustment with the slide control PITCH this function will temporarily increase or
decrease a title's speed during playback.
1 First use the slide control PITCH to adjust the same number of beats (BPM) for both music pieces.
2 Then synchronize the beats of the two music pieces by turning the rotary wheel (the function fast
forward/reverse must be deactivated). The change of speed depends on the turning speed of the wheel:
Rotating the wheel in a clockwise direction will increase your title speed and rotating the wheel in a
counterclockwise direction will decrease your title speed. As soon as you stop turning the wheel the
speed will automatically return to its previously set speed.
3 Alternatively to the rotary wheel you can also use the buttons PITCH BEND for matching the beat. As
long as the or - is kept pressed, the title is played 16 % faster or slower. As soon as you release
the buttons PITCH BEND the BPM will automatically return to normal.
6.11 Playing a continuous loop
A section within a title can be repeated as a seamless continuous loop as many times as desired. This loop
can be overwritten at any time and is deleted when selecting another title, changing the CD or switching the
unit off and on again.
1 In play mode, shortly actuate the button IN (LED flashes blue) when the desired starting point of the loop
is reached. "LOOP" flashes repeatedly on the display.
2 Shortly actuate the button OUT when the desired end point of the loop is reached. The section between
the starting point and the end point of the loop is continuously repeated. The buttons IN and OUT light.
The insertion "LOOP" lights permanently.
3 To exit the loop and to continue the title, press the button OUT. The illumination of the button OUT and
the insertion "LOOP" on the display will be extinguished. The button IN will flash to indicate that the loop
has been memorized and is ready to be engaged. By selecting another title it is also possible to exit the
loop.
4 To restart the loop, press the button RELOOP. The buttons IN and OUT will light again.
5 To program another loop, redefine the starting and the end point with the button IN and OUT.
6.12 Selecting repeat functions
With the button REPEAT two different repeat functions can be selected:
• first actuation of the button: continuous repeat of the selected title (indication "REPEAT
1")
• second actuation of the button: continuous repeat of all titles of the CD (indication "REPEAT
ALL")
• third actuation of the button: return to normal play
6.13 Programming an individual title sequence
For playing selected titles in a certain order, an individual title sequence with up to 20 titles can be
programmed. This sequence will be deleted by ejecting the CD or switching the unit off and on again.
1 In pause mode, press the button PGM on the player or PROGRAM on the remote control to activate the
programming mode. The insertion "PROGRAM" will come on flashing. Additionally, the display will
indicate the first memory location number P01 on the left and the title number 001 next to it.
2 Use the buttons
and
to select the first title for the title sequence.
3 After the title selection, press the button PGM on the player or PROGRAM on the remote control to
confirm the selection. The display will show the second memory location number P02.
4 Proceed in the same way for all further titles until the title sequence has been programmed.
5 To start the playback of the title sequence, press the button
repeatedly ("PROGRAM" is displayed).
6 To add further titles to the title sequence, follow steps 1 to 5.
7 To delete the title sequence and to continue normal play, keep the button PGM on the player or
PROGRAM on the remote control pressed until the insertion "PROGRAM" will be extinguished.
Содержание XCP-1400
Страница 2: ...00047146 DOC Version 1 0 2 29 ...
